DEPARTMENT OF ENGINEERING
1994
BRATT, A. H., RICHARDSON, A. M. D., HARVEY, R. J. and DOREY, A. P.
A design-for-test structure for optimising analogue and mixed signal IC test. ED&TC, Paris, 1994, 24-34.
1995
BRACEWELL, R. H., CHAPLIN, R. V., LANGDON, P. M., LI, M., OH, V. K. and SHARPE, J. E. E.
Integrated platform for AI support of complex design (part II): supporting the embodiment process: in Sharpe, J. E. E. and Oh, K. V. eds., Proceedings of the 1995 Lancaster international workshop on engineering design published as AI support for conceptual design, Ambleside, Springer-Verlag, 1995, 189-207.
BRADLEY, D. A. and SEWARD, D. W.
Developing real-time autonomous excavation - the LUCIE story: in Proceedings of the 34th control and decision conference, New Orleans, 1995, 3028-33.
BROOKS, R. J. and TURVEY, G. J.
Lateral buckling of pultruded GRP I-section cantilevers. Composite Struct., 32(1-4), 1995, 203-15.
BROWNE, S., HARGREAVES, J. K. and HONARY, B.
An imaging riometer for ionosphere studies. Electon. & Engin. Commun., 7, 1995, 209.
COOPER, C. and TURVEY, G. J.
Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material. Composite Struct., 32(1-4), 1995, 217-26.
COULTON, P., HANNAFORD, C. D., and HONARY, B.
Coding for both protection and synchronisation. IEE Proc.-Commun., 142(6), 1995, 352-6.
DAWSON, D.
Fluid power actuators. Actuators for control and measurement. Institute of Physics Publications, 1995, 8-38.
DAWSON, D. and TURNBULL, S. R.
The securing of vehicles on roll-on/roll-off ships. Trans. Royal Inst. Naval Archit., 137, 1995, 37-53.
GROUT, I. A., BURGE, S. E. and DOREY, A. P.
Design and testing of a PI-controller ASIC. Microprocess. & Microsyst., 19(1), 1995, 15-22.
HANNAFORD, C. D.
Coding for both protection and synchronisation: in Proceedings of the third international symposium on communications theory and applications, Ambleside, IEE, 1995, 48-52.
HONARY, B., MARKARIAN, G. S. and DARNELL, M.
Low-complexity trellis decoding of linear block-codes. IEE Proc.-Commun., 142(4), 1995, 201-9.
KUMAR, L.†, SPADTKE, P.†, CARTER, R. G. and PERRING, D.†
Three-dimensional simulation of multistage depressed collectors on micro-computers. IEEE Trans. Electron Devices, 42(9), 1995, 1663-73.
MARKARIAN, G. S., HONARY, B., and BLAUM, M.
Maximum-likelihood trellis decoding technique for balanced codes. Electron. Lett., 31(6), 1995, 447-8.
ROBINSON, T. R.†, HONARY, F., STOCKER, A. J.† and JONES, T. B.†
Factors influencing the heating of the auroral electroject by high-power radio-waves. Adv. Space Res., 15(12), 1995, 41-4.
SCOTT, J. N., BRADLEY, D. A., ADELSON, R. M. and PENGELLY, M.
Issues in the development of data flow simulation of construction sites: the pursuit of quality. Int. J. Project Manage., 13(5), 1995, 335-9.
SEWARD, D. W., MARGRAVE, F. W., SOMMERVILLE, I. and KOTONYA, G.
Safe systems for mobile robots: the safe-SAM project: in Redmill, F. and Anderson, T. eds., Proceedings of the 3rd safety-critical systems symposium published as directions in safety-critical systems, Brighton, Springer-Verlag, 1995, 153-70.
TURVEY, G. J.
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project: in Clarke, J. L. ed., EUROCOMP design guide and background projects, London, Chapman and Hall, 1995.
TURVEY, G. J. and COOPER, C.
Single bolt tension joint tests on pultruded GRP WF-section web and flange material: in Poursartip, A. and Street, K. eds., Proceedings of the 10th international conference on composite materials (ICCM-10), Vancouver, Woodhead Publishing Ltd., 1995, 621-8.
TURVEY, G. J. and SALEHI, M.
Large deflection analysis of eccentrically stiffened sector plates: in Topping, B. H. V. ed., Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95), Edinburgh, Civil-Comp Press, 1995, 243-53.
ULJEV, V. A.†, SHIROCHKOV, A. V.†, MOSKVIN, I. V.† and HARGREAVES, J. K.
Midday recovery of the polar-cap absorption of 19-21 March 1990: a case study. J. Atmos. & Terr. Phys., 57(8), 1995, 905-15.
WIDDEN, M. B.
Fluid mechanics: in Foundations of engineering, Macmillan, 1995.
ZHAO, H. B., CARTER, R. G., HANNAFORD, C. D., ZHOU, P. and HUGHES, E. A.
The improvement of the output performance of a low-energy medical standing-wave accelerator. Nucl. Instrum. & Methods Phys. Res.: Sect. A - Accel., Spectrom., Detectors & Assoc. Equip., 356(2-3), 1995, 552-7.